1
IMPORTANT SAFETY INSTRUCTIONS
Please read the basic protective measure as below before
using.
1. Read these instructions before use.
2. Heed all warnings.
3. Follow all instructions.
4. Do not block any ventilation openings. Install in
accorance with the manufacturer’s instructions.
5. Be sure to connect to an appropriate outlet with a
protective grounding connection. Improper grounding
can result in electrical shock.
6. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
WARNING-Improper grounding can result in electrical
shock.
7. Keep this unit away from the following locations:
(1) Locations exposed to oil splashes or steam, such
as near cooking stoves, humidifiers, etc.
(2) Unstable surfaces, such as a wobbly table or slope.
(3) Locations exposed to excessive heat, such as
inside a car with all the windows closed, or places that
receive direct sunlight.
(4)Locations subject to excessive humidity or dust
accumulation.
8. Always lower the volume control to minimum before
turning on the power to this unit. A sudden blast of
sound may damage your hearing.
9. This unit has ventilation holes at the front and rear to
prevent the internal temperature rising too high. Do not
block them. Blocked ventilation holes are a fire hazard.
In particular, do not:
(1) Place the unit on its side or upside down.
(2) Place the unit in any poorly-ventilated location
such as a bookcase or closet (other than on the
dedicated rack).
(3) Cover the unit with a table cloth or place it on a
carpet or bed.
10. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
11.
Connect this unit’s power cord only to an AC outlet of
the type stated in this Owner’s Manual or as marked on
the unit. Failure to do so is a fire and electrical shock
hazard.
12. Do not scratch, bend, twist, pull, or heat the power cord.
A damaged power cord is a fire and electrical shock
hazard.
13. In case an abnormality occurs during operation:
(1) If the power cord is damaged (i.e., cut or a bare
wire is exposed), ask your dealer for a replacement.
Using the unit with a damaged power cord is a fire and
electrical shock hazard.
(2) Should this unit be dropped or the cabinet be
damaged, turn the power switch off, remove the power
plug from the AC outlet, and contact your dealer. If you
continue using the unit without heeding this instruction,
fire or electrical shock may result.
(3) If you notice any abnormality, such as smoke, odor,
or noise, or if a foreign object or liquid gets inside the
unit, turn it off immediately. Remove the power cord
from the AC outlet. Consult your dealer for repair.
Using the unit in this condition is a fire and electrical
shock hazard.
14. Always turn the power off when the amplifier is not in
use. Illustrations in this manual are for explanatory
purposes only, and may not match the actual
appearance of the product during operation.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of
uninsulated "dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
Applies only to altitudes below 2000m area
safety.
Applies only in Non-tropical area safety.
≤2000m
