DIGISOL DG-WA1000N Wireless LAN Access Point Quick Installation Guide
5
Step 3: Connect one end of a network cable to the LAN port on AP and the other end to one of the LAN
port on router. Power ON the router. Click
Next
to continue.
Step 4: Ensure that the LEDs of POWER, WLAN and LAN port that the AP is connected are ON. If not, try the
above steps again.
LED Indicators:
LED
Light
Status
Description
POWER
On
AP is powered on.
On
WPS setup is in progress.
Off
Wireless network is switched off.
WLAN
Flashing
Wireless network is ready and WPS setup is
not in progress.
On
LAN port is connected.
Off
LAN port is not connected.
LAN
Flashing
LAN port is transferring or receiving data.
