Digisol DG-SC2600, Quick Installation Manual

Page: 4 / 17

4

No pre-loaded software required - all you need is a browser like
Internet Explorer 6 (and above, with plugin installed).

With supplied SKYROS Manager software, you can connect up to 16
video cameras and view images captured by every camera at the
same time.

Supports 3 video resolutions: MJPEG and H.264 SXGA (1280 x
1024), VGA (640 x 480) and QVGA (320 x 240); MPEG4 XGA (1024
x 768), VGA (640 x 480) and QVGA (320 x 240).

Anti-flicker function (eliminates flash caused by fluorescent lights, 50 /
60Hz selectable).

Audio function, suitable for applications like video conference or
environment monitor.

Wired and wireless network (802.11b / 802.11g / 802.11n) supports
up to 100Mbps for wired network.

Wireless data encryption (WEP / WPA).

Supports DHCP and PPPoE protocol, you can also assign a fixed IP
address to the camera.

Supports Dynamic DNS (used to allocate the IP camera’s Internet
address, when the ISP you’re using does not assign you a fixed
Internet address).

Supports UPnP, Windows XP (and above) will discover this IP
camera in network neighbor automatically.

Send captured picture and video by Email or FTP when motion is
detected.

Configurable motion detection sensitivity (from most sensitive to least
sensitive).

Built-in clock, date and time information will be recorded with every
captured picture / video clip (also supports auto time synchronization
via network time protocol).

Upgradeable firmware.

Supports up to 16 users, and you can set different password to
different users.

Usage and event logging.