DG-HR1070MSE Quick Installation Guide
DG-HR1070MSE Quick Installation Guide
DG-HR1070MSE Quick Installation Guide
Connect to your network
1. Ensure that your DG-HR1070MSE 4G Mobile Router is powered
OFF.
2. Remove the back cover and take out the battery. Slide your (U) SIM
card into the slot provided, ensuring that the alignment is the same as
indicated by the logo next to the slot. The gold contacts on the card
should be facing downwards.
Caution: Always unplug and turn off the router before
installing or removing the SIM card. Never insert or
remove the SIM card while the router is in use.
3. Press and hold the power button at the side of the router.
a. The Power LED will light Blue or Green after Power on
and performs its initialization processes.
b. After a few moments, the Wireless LED will glow blue.
For more details please
refer to “
LED Status
” explained earlier.
Configure the Router
Connect via Wi-Fi:
To connect to the router using Wi-
Fi, open your operating system’s
wireless networking utility and scan for available networks. By default, the
network name (SSID) of DG-HR1070MSE will
be “
DIGISOL
”
You will then be prompted to enter the network security key for your
router. The unique security key for your router will be displayed on a
sticker in the router’s battery bay. By default the security key is
“
12345678
”.
Web Based Configuration
To access the configuration, open a web browser (such as Internet
Explorer) and enter the IP address of the router, which is
192.168.2.1
by
default.
Once you have reached the configuration utility through your web
browser, you will need to log in. Enter
admin
as the username, and then
enter the password. By default, the password is
1234.
Click Login to continue.
Note: For detailed configuration of the router, please refer to the user
manual.
This product comes with a Limited Lifetime Warranty. For further details
about warranty policy and Product Registration, please visit support
section of
