Digisol DG-GS4826S, Management Manual

Page: 280 / 1344

C
HAPTER
14 | Security Measures
AAA Authorization and Accounting
– 280 –
n
Set Key – Mark this box to set or modify the encryption key.
n
Authentication Key – Encryption key used to authenticate logon
access for client. Do not use blank spaces in the string. (Maximum
length: 48 characters)
n
Confirm Authentication Key – Re-type the string entered in the
previous field to ensure no errors were made. The switch will not
change the encryption key if these two fields do not match.
u
n
Global – Provides globally applicable settings.
n
Server Index – Specifies the index number of the server to be
configured. The switch currently supports only one server.
n
Server IP Address – Address of the server.
(A Server Index entry must be selected to display this item.)
n
Authentication Server TCP Port – Network (TCP) port of
server used for authentication messages.
(Range: 1-65535; Default: 49)
n
Set Key – Mark this box to set or modify the encryption key.
n
Authentication Key – Encryption key used to authenticate logon
access for client. Do not use blank spaces in the string. (Maximum
length: 48 characters)
n
Confirm Authentication Key – Re-type the string entered in the
previous field to ensure no errors were made. The switch will not
change the encryption key if these two fields do not match.
Configure Group
u
Server Type – Select RADIUS or server.
u
Group Name - Defines a name for the RADIUS or server
group. (Range: 1-255 characters)
u
Sequence at Priority - Specifies the RADIUS server and sequence to
use for the group. (Range: 1-5)
When specifying the priority sequence for a sever, the server index
must already be defined (see "Configuring Local/Remote Logon
Authentication" on page 277 ).
W
EB
I
NTERFACE
To configure the parameters for RADIUS or authentication:
1. Click Security, AAA, Server.
2. Select Configure Server from the Step list.