Digisol DG-GS4824F, Installation Manual, Page: 32 / 68

C
HAPTER
3
| Installing the Switch
Installing an Optional SFP Transceiver
– 32 –
3.
If installing a single switch only, turn to “Connecting to a Power Source” on
page 35 .
4.
If installing multiple switches, mount them in the rack, one below the other,
in any order.
D
ESKTOP OR
S
HELF
M
OUNTING
The switch includes four pre-installed rubber feet for desktop or shelf mounting.
To mount devices on a horizontal surface, follow these steps:
1.
Set the device on a flat surface near an AC power source, making sure there
are at least two inches of space on all sides for proper air flow.
2.
If installing a single switch only, go to “Connecting to a Power Source” on
page 35 .
3.
If installing multiple switches, place each device squarely on top of the one
below, in any order.
I
NSTALLING AN
O
PTIONAL
SFP T
RANSCEIVER
The SFP slots support the following optional SFP transceivers:
u
1000BASE-SX
u
1000BASE-LX
u
1000BASE-LH
u
1000BASE-LHX
u
1000BASE-ZX
u
1000BASE-BX20
u
1000BASE-BX10