Digisol DG-GR1010, Quick Installation Manual

Page: 6 / 16

1. Installed on the desktop
Place the machine on a clean bench, this installation is relatively simple,
you can observe the following operation:
●
Ensure the smooth workbench.
●
Around the device enough space for heat dissipation.
●
Do not place objects on the device.
2. Mounted on the wall
●
Observation ONU equipment chassis two cruciform recess, in
accordance with the position of the groove, installed two screws in the
wall.
●
The original selected two mounting screws gently snap into recesses
aligned.
●
Slowly let go, so that the device under the support of the screw
hanging on the wall.
2:2 Panel Lights
LED Mark Status Description
Registration
REG
On and
Green in
colour The device is registered to the PON system
Off / Red
in colour Device is not registered to the PON system
Blink Device registration is incorrect
Fast Blink Port is sending or/and receiving data
Interface
LINK/
ACT
On Port is connected properly (LINK)
Off Port connection exception or not connected
Blink Port is sending or/and receiving data (ACT)
System SYS
On / Off System is not running or fatal error
Blink Normal running