Page 2
DG200 DigiSender X2
STEP 2
Connect the power supply unit as show
below.Then, switch ON the DigiSender™
receiver and your television.
IMPORTANT: Always switch off
your mains supply at the socket,
prior to connecting the power sup-
ply units
STEP 3
You must select your televisions A/V
channel in order to view your remote
equipment (satellite/cable television etc.)
This is done on your televisions remote
control unit. We have made a list below of
some of the more common buttons you
need to press to activate the A/V channel.
Please refer to your televisions user guide
for details on connecting external video
sources.
Press...
A/V
VIDEO
TV/VCR
VCR
EXT
LINE
Please note, you do not need to tune your
TV into the DigiSender, and your TV does
not need an aerial connection.
Figure 13.1 Connect
PSU to Receiver
Figure 13.2:
Connect PSU to
240V mains outlet
