Page 2
Please read this instruction manual carefully prior to installation
DG44RX DigiSender® X7 Additional Receiver
continued...
Did you know?
The DigiSender® Receiver can be connected to a Hi-Fi using the Left & Right Audio outputs
on the rear of the unit.
Phono cable may be required.
STEP 4
STEP 5
Connect the PSU to an available mains socket.
Connect the 9V DC Power Supply Unit (PSU) to
the socket labelled PSU.
Press the POWER button on your DigiSender®
Remote Control to switch the Receiver on. The
power LED will light up green to indicate the
device is switched on.
Switch on the television and select the correct
SCART channel using the TV Remote Control. This
may be labelled as one of the following buttons:
AV, VIDEO, VCR, AUX, SCART,
EXT, 0, or
Refer to your tv’s manual for further assistance.
STEP 6
Summary of Contents for DigiSender X7 DG44RX
Page 7: ......