Page 6
Online Support at
www.digisender.net
DG440 - DigiSender® X7
STEP 2
Install the
DigiSender® X7
Transmitter Unit
The transmitter unit is designed to send video and sound from one of up to 4
connected sources to a receiver somewhere else in your home.
What’s the
A/B
switch for
??
STEP 1
STEP 2
STEP 3
Connect DigiConnector™ 1 into your satellite or
cable receiver.
Use the SCART socket labelled ‘TV’
and
connect any existing SCART lead (if present)
into the rear (socket) of the DigiConnector™
.
Place the DigiSender®
transmitter
on a flat
surface near to your source equipment.
Avoid
placing the transmitter directly on top of other
electrical devices (see troubleshooting guide)
Connect DigiConnector™ 2 into your VCR or
DVD.
Where available, use SCART sockets labelled
OUT or TV.
Connect any existing SCART lead in to
the rear socket of the DigiConnector™
The Contrast A/B
switch is present
to compensate
for differences in
equipment/set-
ups.
Once installation
is complete, if
you experience a
poor picture then
adjust the A/B
setting.
LIVING
ROOM
LIVING
ROOM
LIVING
ROOM
