background image

DIGIQUEST

 

 

SAFETY INFORMATION 

 

 

 

 

 

 

 

 

 

 

CAUTION: the only way to disconnect the box from the mains is to 

remove the plug from the outlet. Make sure that the power outlet is easily 

accessible, so that you can easily disconnect the product if necessary. 

Read the manual carefully before using the box. Keep the instructions for 

future reference. Do not open the unit and/or the power supply, touching the 

internal components may cause electric shock. Contact with a voltage of 

100-240V~ can be fatal. Before connecting the box to the power supply, 

make sure that all connections have been made correctly. Always unplug 

the  box  from the power outlet before connecting or disconnecting the 

cables. Failure to observe these precautions can result in damage, fire or 

electric shock, which can result in serious injury! 

POWER SUPPLY. If the model you have purchased requires a power 

supply unit, you must use the power supply unit supplied with the box to 

prevent damage to the unit. The use of a power supply other than the one 

supplied with the box  will automatically relieve the manufacturer  of all 

liability. Check that your power supply corresponds to that required for 

operation (see label on product or product specifications). Consult your 

energy manager if you are unsure of the features of your power supply. Do 

not attempt to repair or splice the power cord. Do not tamper with the power 

cord or plug. Make sure the power cord is not damaged, knotted, or pinched 

before use. It is recommended to disconnect the box from the power supply 

when not in use for a long period of time, during thunderstorms or special 

events. Never unplug the unit from an outlet by pulling on the cable. Do not 

connect or disconnect with wet hands or bare feet. Do not use objects such 

as levers to disconnect the plug from an outlet. The power cord should be 

protected by a plastic cover to prevent it from being damaged or walked on. 

If you smell burnt or smoke, unplug the power cord immediately and contact 

your service representative. 

OVERLOADED.  Do not overload the power outlet, extension cord, or 

adapter as this may cause a fire or electrical shock. Always use standard 

certified cables. Do not connect or modify cables while the box is connected 

This symbol indicates dangerous 

voltage inside the product, which 

may cause electric shock and 

personal injury.

 

This symbol indicates that 

there are important 

instructions accompanying 

the appliance.

 

CAUTION 

RISK OF ELECTRIC  

SHOCK 

DO NOT OPEN 

CAUTION: to reduce the risk of fire and 

electric shock, do not open the unit. All 

work must be carried out by a specialised 

technician. Opening the receiver will 

automatically void the warranty.

 

Summary of Contents for KM9
































Reviews: