5
Power supply for RS-232C scanner–
There are 3 ways to supplying the power, use ex-
5V power supply, use optional power cable
(KBDC) which taking the power from KB wedge or
if the host su5V power from pin 9.
Installing the scanner to the Host System –
1. Turn off the host system.
2. Connect the power if needed.
3. Connect to the proper port on the host system.
4. Turn on the host system.
Switching cable –
Before removing the cable from the scanner, it is
recommended that the power on the host system
is off and the power supply has been disconnected
from unit.
1. Find the small “Pin-hole” on the bottom of the
unit.
2. Use a bended regular paperclip and insert the
tip into the hole.
3. You will head a “click”, then gentle on the strain-
relief of the cable and it will slide out of the
scanner.
SG/LG Series
SD Series
Summary of Contents for SD-303
Page 10: ...10 Chapter 2 Configuration General 2 1 Flow Chart...
Page 51: ...51 Belgium Portuguese Denmark Netherlands Turkey Reserved1 0ZVA 0ZVB 0ZVC 0ZVD 0ZVE 0ZVF...
Page 54: ...54 Code 2 of 6 Reserved4 Reserved5 Reserved6 91P 91Q 91R 91S...
Page 63: ...63 Appendix A Decimal Value Table 8 0 1 2 3 4 5 6 7 9...