background image

 

DigiPoS PowerPoS Technical Manual

 

Integrated Super IO Controller 

  Supports 4 serial ports, parallel port, and floppy disk controller functions 

  Programmable character lengths (5,6,7,8) 

  Even, odd, stick or no parity bit generation and detection 

  Programmable baud rate generator 

  Independent transmit/receiver FIFOs 

 Modem 

Control 

  Plug and play with 96 base IO address and 12 IRQ options 

  Multi-mode parallel port 

o

  Standard mode (SPP), ECP and EPP support 

  Floppy Disk Controller 

  16 bytes of FIFO 

  Data rates up to 1Mbps 

  Perpendicular recording driver support 

  Plug and play with 48 base IO address, 12 IRQ and 4 DMA options 

 

Voltage, Temperature, Fan Speed Monitor and Controller 

  Monitoring of Five positive voltages (one internal), three temperatures 

(one internal) and two fan-speed (CPU & PSU) 

  Programmable control, status, monitoring and alarm facility for flexible 

desktop thermal management 

  Automatic clock throttling with integrated temperature sensing 

  Internal core VCC voltage sensing 

 

Universal Serial Bus Controller 

  USB v.1.1 and Intel Universal HCI v.1.1 compatible 

  Eighteen level (double words) data FIFO with full scatter and gather 

capability 

  Root hub and 2 functioning ports 

 Integrated 

physical 

layer 

transceivers with optional over-current detection 

status on USB inputs 

  Legacy keyboard and PS/2 mouse support 

 

System Management Bus Interface 

  Host interface for processor communications 

  Slave interface for external SMBus masters 

 

PC99-Compatible Power Management 

  CPU clock throttling and clock stop control for complete ACPI C0 to C3 

state support 

  PCI bus clock run, Power Management Enable (PME) control, and 

PCI/CPU clock generator stop control 

  Supports multiple system suspend types: power-on suspends with 

flexible CPU/PCI bus reset options, 

  suspend to DRAM, and suspend to disk (soft-off), all with hardware 

automatic wake-up 

  Multiple suspend power plane controls and suspend status indicators 

  One idle timer, one peripheral timer and one general purpose timer, plus 

24/32-bit ACPI compliant timer 

Page 15 of 82 

Summary of Contents for PowerPoS



















































































Reviews: