User’s Manual
DHT 300 SERIES
NTSC Version
D i g i m e r g e T e c h n o l o g i e s I n c .
3 0 0 A l d e n R o a d
•
M a r k h a m
•
O n t a r i o
•
C a n a d a
•
L 3 R 4 C 1
t e l : ( 9 0 5 ) 9 4 6 - 8 4 7 7
•
f a x : ( 9 0 5 ) 9 4 7 - 0 1 3 8
17
Enter the MENU screen by pressing the MENU button. Scroll through the 12 options by pressing
the UP and DOWN buttons. To enter a sub-menu, press the Enter button where the highlighted
scroll bar is located. To exit the Main Menu, scroll down to the Exit option and press the Enter
button.
NOTE:
In sub menu of the Main Menu, you can exit the Menu mode by selecting Exit, or you
can return to the Main Menu by selecting Return.
NOTE:
The Menu is exited automatically after 60 sec of inactivity.
7.1 TIME / DATE SET
This submenu allows you to change the Time and Date displayed on the monitor, and
also program the information you’d like to appear in the On-Screen Display.
a) DISPLAY : Selecting [Y] enables on screen display of the date & time. Selecting [N]
hides this information.
b)
TIME : Change the time (24 hour clock)
c)
DATE : Change the date.
d)
DATE FORMAT : There are three formats to display the date:
MM / DD / YYYY : for U.S.A.
YYYY / MM / DD : for Asian countries.
DD / MM / YYYY : for European countries.
7.2 SEQUENCE
SET
This submenu allows you to select how long you’d like each channel to appear on-screen
before automatically switching to the next channel in Sequence mode. The Dwell Time is
0-59 seconds selectable for each of the 9(DHT309)/16(DHT316)channels and multi mode.
NOTE:
Channels without a camera, a Video Loss, or a Dwell Time of zero will be
skipped in sequencing.
7.3 TITLE
SET
This submenu allows you to change the title of each camera location (up to 8
characters), or remove the titles from the on-screen display.
a)DISPLAY : Selecting [Y] will enable the camera titles to appear in the on-screen display.
Selecting [N] will remove all titles from appearing in the on-screen display.
b) CH 1 – 9(DHT309)/ CH1-16(DHT316) : Change the titles of each individual camera.
7.4 ALARM
SET
This submenu allows you to enable / disable the camera’s PIR Alarm function by
channel.
a) ALARM : Selecting [OFF] disables PIR motion detection from triggering any alarm.
Selecting [OSD] will allow alarms to be triggered, and the letters “AL” will appear on the
screen of the camera location where the alarm is taking place. A third option,
[OSD+BUZZER] will both display “AL” and emit a buzzer sound in the event of an
alarm.
