The remote connection on the DVR uses 8 data bits, 1 start bit, and 1 stop bit.
Below is an example of the data stream with the control codes shown.
ACT – OxFF
OxCO
ID
STOP – Ox7F
FUNCTION
Please refer to
Appendix 3
for information on the Pin connections and command protocols that would be used in this
application.
Search
The DGR116 allows you to easily find sections of recorded video using the
SEARCH
feature.
To access the Search option, press
MENU
followed by the 4 digit password. Use the
▲
/
▼
to scroll to the
Search
option
and
press
ENTER.
(Menu)
Search
Timer
Record
Camera
System
Event
The following options are available in the Search Menu…
Last Record
►
Last Record
Full List
Alarm List
Time Search
This feature is used to play the last recorded piece of video.
•
In the Search menu,
press
▲
/
▼
to scroll to the Last Record option, then press
ENTER
.
•
The last recorded video will begin playing
Full List
This Feature is used to choose from a listing of all recorded video on the HDD sorted by time.
1. In the Search menu,
press
▲
/
▼
to scroll to the Full List option, then press
ENTER
.
2. Press
▲
/
▼
to select the desired recorded video and press
◄
/
►
to change pages.
3. Press
ENTER
to play selected video.
►
M 2002-JAN-01 01:02:03
M 2002-JAN-01 01:02:03
A 2002-JAN-01 01:02:03
T 2002-JAN-01 01:02:03
E 2002-JAN-01 01:02:03
M 2002-JAN-01 01:02:03
◄
: Page Up
►
: Page Down
An example of a Full List search is shown on the left.
Note that the date and time appear, along with the letter representing the method of
recording that took place.
Press
ENTER
to view a selected piece of video on the list. The DGR116 will play the
video in chronological order, until it hits the End of the list. Playback can be stopped
at any time by pressing the
STOP
button.
M: Manual Record Time
A: Alarm Record Time
M-HDD: Storage in Master HDD
S-HDD: Storage in Slave HDD
14
