Digilock DL310, User Instructions

Page: 2 / 6

Page2
3.3. Add Code Users
3.31 Prior to adding the Code User:
3.311. Write down the User Group. (001-200)
3.312. Write down the Guest Code. (4-8 digits)
3.313. User group corresponds to the guest code.
Several guest codes cannot be set under one group.
Identical guest codes cannot be used with different groups.
Operating instructions Lock status
1 Press
“
#
”
to start the lock “Beeps” twice, keypad lights up, blue light
flashes.
2 Input the “ Master Code ” then “ # ” Lock status as above
3 Within ten seconds (before the indicator light
switches off) input “ 01 ” then “ # ”
Lock status as above
4 Within ten seconds input “ Group No. ” then “ # ”
(Group No. can’t be reused.)
Lock status as above
5 Within ten seconds , input the” Guest Code ” then
“ # ”
Lock status as above
6 Press “ # ” two times. First “ # ” “ Beeps ” two times, status as above
Second “ # ” “ Beeps ” three times, Guest Code
User adding is complete.
7 Wait 15 seconds, or press “ # ” , to exit. Long “Beep” indicator light switches off.
Under this mode, use the Guest Code to open the door directly.
Opening the door:
Operating instructions Lock status
1 Input
“
Guest Code
”
then
“
#
”
Keypad lights up, blue unlock indicator light, with one “Beep”
Lock motor activates, turn the handle to open
2 After 5 seconds “Beeps” twice, red light flashes twice, door locks, indicator light
switches off.
3.5.
Add TM Key Users
3.51 Prior to adding the TM Key User:
3.511 Write down the User Group, (001-200)
3.512 Prepare the TM Key.
3.513 User group corresponds to the TM Key.
Several guest TM Keys cannot be set under one group.
The same TM Key cannot be used with different groups.
Operating instructions Lock status
1 Press
“
#
”
to start the lock “Beeps” twice, keypad lights up, and the blue
light flashes.
2 Input the “ Master Code ” then “ # ” Lock status as above
3 Within ten seconds (before the indicator light
switches off) input “ 01 ” then “ # ”
Lock status as above
4 Within ten seconds (before the indicator light
switches off) input “ Group No. ” then “ # ” (Group
No. can’t be reused.)
Lock status as above
5 Within ten seconds indicator light switches off,
get the “ TM Key ” close to the inductive area,
Lock status as above