DCR1-ATV1
RFID Cam Locks Advanced Security
Shared Use
Product Guide
Phone: 707 766 6000
www.digilock.com | [email protected]
PG-DCR1-AT-DEN
081715
Support
Error Condition Indicator
Locks emit feedback when an error condition exists.
2 sets of three beeps:
The batteries are low. Replace the batteries.
1 beep:
The lock does not recognize the RFID Access Credential.
Does not Operate with a Manager Key
The lock does not recognize the Manager Key. Follow Register/Add Manager Key(s) instructions to register Manager Key to the lock.
For immediate access, operate with another registered Manager Key or with the Programming Key.
Does not Operate with the Programming Key
The lock does not recognize the Programming Key. Contact Digilock Support for assistance.
No Audible Feedback when
`
is Pressed
a.
The batteries may need to be replaced.
b.
Replace the batteries.
c.
If error condition persists, contact Digilock Support.
If the door is locked and the batteries have failed, use the Manager Key to provide external power and operate the lock.
Battery Failure
a.
Touch and hold the Manager Key to the key slot for approximately 10 seconds until a triple-tone beep is heard.
b.
Turn the knob/lever to the unlocked position.
Does not Unlock with the RFID Card, User Key, or RFID Access Credential
The lock does not recognize the RFID Card, User Key, or RFID Access Credential. Operate the lock with a registered Manager Key.
Replace with three premium
alkaline AA batteries.
3
3
Battery Replacement
It is not necessary to remove the lock from the door to change the batteries.
The batteries are located
behind the rear cover.
Ensure that the cam is not
obstructing access to the rear
cover screw.
1
1
Remove the screw and rear
cover.
2
2
Replace the rear cover and
secure the screw in place.
4
4
