For a lost programming key:
Contact your Digilock Product Representative to order a re-
placement programming key.
For a lost manager bypass key(s):
1) collect all remaining manager keys or order additional keys
from your Digilock Product Representative .
2) At one lock press
c K 5 5 K
The LED will flash.
3) Touch the programming key (red) to the key slot for one full
second.
The LED is solid.
4) Touch the programming key (red) to the key slot for one full
second.
The LED will turn off and all registered manager keys will
be erased on the one lock.
5) Follow instructions “To add additional manager bypass
keys.” If you have more than one lock, continue with steps 6
and 7.
6) Follow instructions “ To initialize new locks: (step 2).”
7) Follow instructions “To initialize new locks: (step 3).”
For lost or stolen keys:
1) No Audible feedback when
c
button is pressed:
A) the batteries have failed- replace batteries located in
the rear unit.
B) poor connection on door- remove lock from door and
reinstall.
C) The lock is in “sleep state.” Try again after one minute.
2) Lock does not unlock:
A) listen for additional audible feedback for an indicator as to
what is going on.
B) Try operating with manager bypass key or programming key
C) Contact your Digilock Product Representative or Digilock
customer support.
3) Lock emits 2 sets of three beeps during operation:
A) low battery indicator- replace batteries located in the rear
unit.
4) lock emits 10 rapid beeps during operation:
A) binding indicator- the lock is binding with the strike plate.
Press firmly on the door while operating. If binding is a fre-
quent occurrence, the strike plate and/or door hinges need to
be aligned with the lock.
Troubleshooting
To lock:
1) Find an available lock.
2) press:
c ` ` ` ` K
(any four-digit code)
To unlock:
1) At same lock.
2) press:
c ` ` ` ` K
(same code used to lock)
To lock:
1) Find an available lock.
2) touch the ADA user key (blue) to key slot.
To unlock:
1) At same lock.
2) Touch the ADA user key (blue) to key slot.
To operate with a user code:
To operate with an ADA user key:
To lock or unlock:
1) touch a registered manager bypass key (black) to key
slot .
To lock or unlock:
1) Press:
c K
2) Insert programming key (red) to key slot.
To operate with the manager bypass keys:
To operate with the programming key:
5341 Old Redwood Highway, Suite 200,
Petaluma, CA 94954
Phone: (800) 989.0201
(
707) 766.6000
Fax: (800) 986.4221
(707) 766.6226
For Additional Product and/or
Product Information:
Visit: www.digilock.com
E-mail: [email protected]
Contact: Digilock or your Digilock Product Representative
If you have the high security platform, this product line is capable
of audit trail with use of a software programming kit. For addi-
tional information regarding this feature contact your Digilock
product representative.
Additional Product Features
Product Code: DL01KUSR104
www.spaequip.net
p: 707.737.1100
Page 3 of 3
