22
IOX
5.1.1 Top Bar
The Top Bar of the Controls page includes an illustration of the IOX rear panel. When an input or output is selected in the main
section of the page, the corresponding connector is highlighted.
5.1.2 Analog Section
There are 12 mic preamp and line inputs and 6 line outputs. Select a channel and it will appear in the Focus section.
Analog Input Controls
Use the Focus section to set preamp levels and turn the 48v phantom on and off.
The long meters range from -80 dBFS to 0 dBFS
Mic/Line knob gain range: 0 dB to +52.5 dB in 7.5 dB steps
Fine knob digital gain range: 0 dB to +7 dB in 0.5 dB steps
A clip indicator holds for two seconds or for as long as clipping persists.
Peak hold persists until reset by clicking on the indicator.
From the main Control window of the I/O Control Panel, you can control the Preamp
levels through the text value windows. This lets you quickly control any preamp without
selecting the specific channel box
There are three ways to control this level:
1. Click hold Drag up or Down
2. Double Click for Text Entry
3. Mouse wheel - by Pressing Command (Mac) / Control (PC) you can change these values using Mouse wheel.
Note: this text window will “combine” the Preamp and Fine control as one.
Summary of Contents for IOX
Page 1: ...IOX ...
