VX881HR & VX882HR
User’s Manual
9
Standard installation under Windows 2000, XP,
Windows Server 2003, and Windows Vista
If the driver has been downloaded from our web site, it has to be expanded
prior to the driver’s installation as follows: double-click on the downloaded
file (self-expanding). You can use the default destination location (Windows
temporary folder) or select another directory.
•
Shut down your computer and insert your VX card.
•
Restart your computer.
•
Click on Cancel if the Found New Hardware Wizard appears.
•
Double-click on the HR Runtime vxx.msi/HR Runtime
vxx.msi for Vista icon to launch the driver installation.
•
A welcome message is displayed, click Next to continue.
•
The “License Agreement” window appears: read it, and click on
“I accept the terms in the license agreement”
to approve it.
•
Do the same in the next window for Virtual PCX and PC Codec
Legal Notice.
•
In the “Custom Setup” window, the “
Drivers for the HR board
s”
are
displayed
; by default, both WDM DirectSound and ASIO HR
are installed.
To install the Wave driver, select ‘Wave’.
To be able to use your VX card through np, select the
‘Digigram np’ component option
(or make sure that the np
application explicitly sets the ‘VX_FLAG’ with PCXInitialize()
).
Next.
•
In the “Ready to Install the Program Window”, click on Install
to start copying the files.
•
Note: In case you use an unsigned driver version, the
“Digital Signature Not Found” message may appear
because a non-Microsoft software is about to be
installed.
Click on Continue in the “Hardware installation”
window (Windows XP, Server 2003).
•
Under Windows Vista:
Click Allow in the “User Account Control” window.
Click Install
in the
“Windows Security” window.
•
In the “Digigram drivers” window, select the number and the
size of buffers required by your applications. Click on Ok.
•
Click Finish to complete the driver installation.
