Digigram VX222 v2, User Manual

Page: 10 / 60

D i g i g r a m
10
Note:
Note: Note:
Note: “MME driver” is sometimes mentioned on software requirement charts. It
refers to as “Wave”.
“DirectX driver” is sometimes mentioned on software requirement charts. It
refers to as “DirectSound”.
HARDWARE IN
HARDWARE IN HARDWARE IN
HARDWARE INSTALLATION
STALLATION STALLATION
STALLATION
Note: Note: Note: Note: The card has to be installed in the computer prior to installing its
driver.
Installing the card
Turn off the computer and disconnect its power cord. Open the computer and
position it so that you may easily access its PCI slots. Smoothly insert the card
into a free PCI slot. Press it down to position it firmly. Tighten the screw,
close the computer, connect the power cord and start the computer.
Interrupt and memory address
Hardware interrupt and addresses are automatically set up at start-up by
the PCI PnP BIOS.
SOFTWARE INSTALLATIO
SOFTWARE INSTALLATIO SOFTWARE INSTALLATIO
SOFTWARE INSTALLATION
N N
N
Please visit the Digigram web site at www.digigram.com
www.digigram.com www.digigram.com
www.digigram.com for the most
recent driver.
In case you run a specific application developed or installed by a Digigram
partner, it might require the use of a specific driver version. In this case,
make sure that the updated driver has been approved by your supplier.
Under Windows 9x, the driver is a Wave driver.
Under Windows 2000 & XP, the driver is DirectSound.
In addition, a Wave driver is available, its installation is optional.
Under Mac OS X, the driver is a Core Audio driver
Installation under Mac OS X
•
Switch off your Mac, and plug the VX222
v2
in a free PCI slot.