Digigram VX1221e, User Manual

Page: 12 / 33

7 SOFTWARE INSTALLATION
Note: the installation of the software requires administrator rights
on your computer
Please visit the Digigram web site at ​ www.digigram.com ​ ​ for the most
recent driver.
In case you run a specific application developed or installed by a
Digigram Partner, this application might require the use of a specific
driver version. In this case, make sure that the updated driver has
been approved by your supplier.
7.1 Standard installation under Windows
If the driver has been downloaded from our web site, it has to be
expanded prior to the driver’s installation as follows: double-click on
the downloaded file (self-expanding). You can use the default
destination location (Windows temporary folder) or select another
directory.
● Shut down your computer and insert your VX card.
● Restart your computer.
● Click on ​ Cancel if the ​ Found New Hardware Wizard
appears.
● Double-click on the ​ HR Runtime vxx.msi/HR Runtime
vxx.msi for Vista
​ ​
icon to launch the driver installation.
● A welcome message is displayed, click ​ Next ​ ​ to continue.
● The “ ​ License Agreement ​ ​ ” window appears: read it, and
click on
“I accept the terms in the license agreement” to approve
it.
● Do the same in the next window for Virtual PCX and PC
Codec Legal Notice.
● In the ​ “Custom Setup” window, the “ ​ Drivers for the HR
board
​
s” are displayed; by default, both WDM DirectSound
and ASIO HR are installed.
To install the Wave driver
∗ ∗
​ ​
, select ‘ ​ Wave’ ​ ​ .
6
To be able to use your VX card through np, select the
‘Digigram np’ component option (or make sure that the np
6
∗ ∗ ​ ​ ​ Windows XP and Server 2003 only
12