PCX881HR & PCX882HR
User manual
7
REQUIREMENTS
Minimum hardware requirements
One free PCI or PCI-X slot (5 V or 3.3 V)
CPU power and memory required depend on the operating system and on the
audio application used.
Software requirements
To use your PCX881e or PCX882e, install the driver from the HR Runtime
package version 1.40 (Vista: 1.60) or higher. This package includes:
•
a Digigram np driver enabling OEM applications to best capitalize on
the boards
•
a WDM DirectSound driver
Microsoft DirectX 9 or higher must be installed on your computer.
•
a Wave driver
∗
(32 bits, installation optional)
•
an ASIO driver (32 bits, installation optional)
Note: the HR Runtime package for Windows Vista does not include a Wave driver. In
case your audio application explicitly requires a Wave interface, a Wave driver
is available on request. In this case, please contact
Digigram
.
Supported operating systems
PCX881HR and PCX882HR cards run under Windows XP, Windows Server
2003, Windows Server 2008, Windows Vista and Windows 7.
HARDWARE INSTALLATION
The card has to be installed in the computer prior to installing its driver.
Installing the card
Gently plug the card in a free PCI slot and press it down to position it firmly.
Tighten the screw.
Interrupt and memory address
Hardware interrupt and addresses are automatically set up at start-up by the PCI
PnP BIOS.
∗
Windows XP, and Server 2003 only
