Digigram PCX880e, User Manual

Page: 14 / 33

To use the ASIO driver on your PCX sound card, the option ​ “PCM only”
has to be activated in the Digigram control panel (CPL). To access this
control panel, go to ​ <Start> ​ , ​ <Programs> ​ , ​ <Digigram> ​ , ​ <Digigram
Control Center> ​ . For detailed information on how to use the Digigram
control ​ ​ panel, ​ ​ please ​ ​ refer ​ ​ to ​ ​ its ​ ​ online ​ ​ help ​ ​ ( ​ “? ​ ​ Help” ​ ​​ button).
Parameterizing
​ ​
the
​ ​
Wave
​ ​
driver
In the case of an application managing exclusively PCM audio, the latency
of the Wave driver can be optimized activating the option ​ “PCM only”
in the Digigram control panel (CPL). With this option enabled, the
latency of the Wave driver is optimized (in this case the PCX on-board
MPEG encoding/decoding is disabled). To access this control panel, go
to ​ <Start> ​ , ​ <Programs> ​ , ​ <Digigram> ​ , ​ <Digigram Control Center> ​ .
For detailed information on how to use the Digigram control panel,
please
​ ​
refer
​ ​
to
​ ​
its
​ ​
online
​ ​
help
​ ​
(
​
“?
​ ​
Help”
​ ​​
button).
14