D i g i g r a m
SOFTWARE INSTALLATION
Please visit the Digigram web site at www.digigram.com for the most recent
driver.
In case you run a specific application developed or installed by a Digigram
Partner, it might require the use of a specific driver version. In this case, make
sure that the updated driver has been approved by your supplier.
Installation under Windows 98 SE and Millennium
If the driver has been downloaded from our web site, it has to be expanded
prior to the driver’s installation as follows: double-click on the downloaded
file (self-expanding). You can use the default destination location (Windows
temporary folder) or select another directory.
•
From this directory, run
setup.exe
to install the driver.
•
The License Agreement window appears: read it, and click on Yes to
approve it. Do the same for the Read Me First window.
•
Choose the destination folder where Setup will install the files. By
default files are stored in
\pcxnp
. Click on Next.
•
Check the option “driver for the second group of boards”, and
check the associated option “Wave” if you want to also install the
Wave driver. Click on Next.
•
As some components of Virtual PCX are installed, a license
agreement of Virtual PCX is displayed. Read it and click on Yes to
continue the installation.
•
Select the program folder where the program icons will be added.
Click on Next.
•
Click on Next to start copying the files.
•
If you have selected the Wave driver:
- The information window about the Wave driver installation
appears, and the system updates its drivers list.
- In the window to select the manufacturer, click on Have disk
- Browse to the destination folder
\npdr
v2
\Wave
and click OK.
- Click OK in the following windows.
- The “
Digigram Wave for np…”
item is selected. Click on Finish.
- Click Next in the information window about the Wave driver
installation.
•
In the “Digigram drivers” window, select the number and the size
of buffers required by your applications. Click on Ok.
10
