LXIP
user Manual v1.04
9. CONFIGURATION OF THE AoIP PARAMETERS
The network parameters of LXIP can be configured through its embedded WEB server, which is accessible from
any of the two Eth ports.
9.1. Default IP addresses of Eth ports
Eth0: 192.168.0.100
Eth1: 192.168.1.100
Port to access the WEB pages: 8081
From a PC connected to the AoIP network, and set to an IP address that belongs to the same subnetwork as the
LXIP card, enter the following in your WEB browser:
192.168.0.100:8081
for a connection to Eth0, or
192.168.1.100:8081
for a connection to Eth1.
The following page is displayed.
The parameters can be modified by clicking on Enable Edit Mode, on the top of the WEB page.
The requested password is: ravenna.
The following page is displayed;
19
