background image

(1) Press the 

LEFT 

and 

RIGHT

 button to select among the time 

setting items – hour, minute, second. Press the 

UP

 and 

DOWN

 

button to set the time.   

(2) Press 

the 

LEFT 

and 

RIGHT

 to select “Save” and then press the 

“ ” / “ENTER” to confirm the date and time setting.     

 

Set the Alarm 

To enable the alarm,   

(1) Press 

UP

 and 

DOWN

 button to select “SetTime/Set Alarm” and 

then press the 

“ ” / “ENTER”

 button to confirm. 

(2) Press 

UP

 and 

DOWN

 button to select “Set Alarm”. 

(3) Press  the 

LEFT 

and 

RIGHT

 button to select “OFF” and then 

press the 

UP

 / 

DOWN

 button to change “OFF” to “ON”. 

(4) Press  the 

LEFT 

and 

RIGHT

 button to select among the time 

setting items – hour, minute, second. Press the 

UP

 and 

DOWN

 

button to set the time item.   

(5) Press  the 

LEFT 

and 

RIGHT

 button to select “Save” and then 

press the 

“ ” / “ENTER”

 to confirm the alarm time. The alarm 

should ring at the specified time every day. 

Note: The frame must be on for the alarm to go off, please see 
the below (Auto On/Off) to set the time for the frame to turn on 
so that the alarm can be of best use.     

 

Set Auto-ON and Auto - OFF time   

Select “Set ON/OFF Time” to set the time when the device powers on 
or powers off automatically.   
(1) Press the 

LEFT 

and 

RIGHT

 button to select among the time 

setting items – hour, minute, second. Press the 

UP

 and 

DOWN

 

11

 - 

Summary of Contents for 7" Digital Picture Frame
















Reviews: