Hard Disk Installation
Please follow the steps as illustrated below to install the hardware:
Please take out the disk tray from
NVR.
Please connect the Ethernet cable
to the port of Giga LAN.
Install the hard disk in each tray
and lock the disk with four screws.
Ensure the disk holes match the
holes at the base of disk tray.
Please connect the power cord to
power connector.
Please insert the disk tray into
NVR and push it to the end.
After the power cord is connected,
NVR will automatically turn on and
beep once. The installation of NVR
is complete right now.
6
