manualshive.com logo in svg

DiGiDrid Q, User Manual

Share
Download
DiGiDrid Q User Manual Download Page 15

15

   

D

ig

iG

rid

 Q

The new device is visible in the rack slot. Unless changed by the user, it remains a clock slave and 
is colored green. Use the same menu to change the clock master assignment from one device to 
another or to remove the device from the rack slot.

4.1 Device Firmware

Firmware is a small program that runs on a device in order to control it. It enables DiGiGrid Q to communicate correctly with 
SoundGrid Studio. An I/O that is using outdated or incompatible firmware will not work properly in a SoundGrid network until its 
firmware is updated. To see if your DiGiGrid Q firmware is compatible with the version of SoundGrid Studio that you are currently 
running, go the System Inventory page and locate the device. Next to each device slot is a button labeled FW, whose color indicates 
firmware status.

Grey

Compatible firmware

Blue

Compatible firmware, but a newer version exists

Red

Firmware not compatible and must be updated in order to use

Click on the FW button to launch the firmware Updater. This will initiate a scan of the hardware and then offer options.  
Do not disconnect the device or turn off the computer until you see “Done.” After updating, turn the DiGiGrid Q OFF and  
back ON to reset the device.

Summary of Contents for Q



































Reviews:

No comments

Brands by name

Popular brands

Load more brands