background image

 

Chapter 3: Magma 13-Slot Expansion Chassis

 

11

 

Configuring the Magma 
13-Slot Expansion Chassis

 

Before installing any of the following hardware, 
turn off the expansion chassis, your computer, 
and any peripherals. Leave your computer’s 
power cable plugged in so the computer is 
grounded.

Do not remove cards from their antistatic bags 
until you have discharged static electricity by 
touching a grounded object (such as the power 
supply of your computer).

 

Connecting the Expansion Chassis

 

Install the chassis host card:

 

1  

 

Install the Magma Host Card in the lowest 

numbered slot in your computer. 

To locate the lowest numbered slot, refer to your 
computer’s documentation, or see “Verifying 
Slot Numbers in Your Computer with DigiTest” 
on page 25.

 

2  

 

Attach a 2- or 4-foot expansion chassis cable 

to the host card. If necessary, refer to the Magma 
guide for specific instructions.

 

3  

 

If using a SCSI HBA, install it in the highest 

numbered remaining slot in your computer. 

For 9500/9600 computers, the SCSI HBA should 
reside before the video card.

 

Install the chassis controller card:

 

1  

 

Install the Magma Controller card in the Ex-

pansion Slot of the expansion chassis:

• For model PCI-13-RX-400V, this is the slot 

furthest from the power supply.

• For model PCI-13R, this is the slot nearest the 

power supply. 

 

2  

 

Attach the other end of the expansion chassis 

cable to the controller card. If necessary, refer to 
the Magma guide for specific instructions.

 

Installing the Digidesign Cards

 

Install the Digidesign audio cards:

 

1  

 

Install the primary Core card (clock master 

with primary audio interface) in slot 4 of the ex-
pansion chassis.

 

2  

 

If using a Pro Tools 24 MIX system, install the 

remaining cards in successive chassis slots in the 
following order:

• MIX Core cards (additional)

• MIX Farm cards

• d24 cards

• MIX I/O card

• DSP Farm cards

• SampleCell cards

 

If using Magma model PCI-13R, make sure 
you attach the chassis cable to the host card 
and 

 

not

 your SCSI HBA. Both cards have a 

68-pin VHDCI connector.

6-foot expansion chassis cables are not sup-
ported.

See “Example 1, Magma 13-Slot” on 
page 13.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Pro Tools 24 MIX



































Reviews: