Copyright
This guide is copyrighted ©2003 by Digidesign, a division of
Avid Technology, Inc. (hereafter “Digidesign”), with all rights
reserved. Under copyright laws, this guide may not be
duplicated in whole or in part without the written consent of
Digidesign.
DIGIDESIGN, AVID and PRO TOOLS are trademarks or
registered trademarks of Digidesign and/or Avid Technology,
Inc. All other trademarks are the property of their respective
owners.
All features and specifications subject to change without
notice.
PN 910611738-00 REV A 09/03
Communications & Safety Regulation Information
Compliance Statement
The model 96i complies with the following standards
regulating interference and EMC:
•
FCC Part 15 Class A
•
EN55103 – 1, environment E4
•
EN55103 – 2, environment E4
•
AS/NZS 3548 Class A
Radio and Television Interference
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules.
Communications Statement
This equipment has been tested to comply with the limits for a
Class A digital device. Changes or modifications to this product
not authorized by Digidesign, Inc., could void the Certification
and negate your authority to operate the product. This product
was tested for CISPR compliance under conditions that
included the use of peripheral devices and shielded cables and
connectors between system components. Digidesign
recommends the use of shielded cables and connectors
between system components to reduce the possibility of
causing interference to radios, television sets, and other
electronic devices.
Safety Statement
This equipment has been tested to comply with USA and
Canadian safety certification in accordance with the
specifications of UL Standards; UL1419 and Canadian CSA
standard; CSA C22.2 No.1-M90. Digidesign Inc., has been
authorized to apply the appropriate UL & CUL mark on its
compliant equipment.
Important Safety Instructions
When using electric or electronic equipment, basic precautions
should always be followed, including the following:
•
Read all instructions before using this equipment.
•
To avoid the risk of shock, keep this equipment away from
rain water, and other moisture. Do not use this equipment
if it is wet.
•
The equipment should only be connected to the correct
rating power supply as indicated on the product.
•
Do not attempt to service the equipment. There are no
user-serviceable parts inside. Please refer all servicing to
authorized Digidesign personnel.
•
Any attempt to service the equipment will expose you to a
risk of electric shock, and will void the manufacturer’s
warranty.
•
The product should be connected only to the correct power
supply as indicated on the product.
Warning!
•
HD audio interfaces need room at their sides to maintain
proper air flow and cooling.
•
Do not install these units into a rack or other enclosure that
doesn't leave room on either side for the unit fans.
•
Do not block the sides of the units (where fans are), or
disconnect the fan.
•
If the units are racked up in a case, remove all lids, doors,
or covers before operating the units.
•
Failure to do so can result in the units overheating very
quickly, which can permanently damage them.