NETWORKING -
VOIP
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. All other brands, products and trademarks are property of their respective o
wners.
For further information: [email protected] or http://www.digicom.it
VoiceGATE SIP
The advantages of a modular solution.
VoiceGATE SIP is available in a complete range of
versions suitable for any needs. There are models with
analog ports (up to 4ab) or ISDN (2BRI).
Interconnection with PABX.
VoiceGATE SIP can be used in Trunk applications, it
substitutes the local lines of the PABX.
Security and Firewall.
The security of your accesses is guaranteed by the
firewall function. VoiceGATE SIP integrates functions like
the Packet Filtering (Logical Port control, Source
address, Destination address, MAC address) and DOS
protection (Denial of Service).
ADSL and Ethernet.
VoiceGATE SIP is available with two different geographic
interfaces: ADSL and Ethernet.
The version with built-in ADSL router is suitable for all
those access applications of main or branch offices.
The Bridge/Ethernet version is used when the Internet
router is already installed.
Code
Version
Voice(1)
Description
8D5554
Ethernet
2
VoiceGATE SIP Ethernet 1 WAN, 3 LAN, 2 analog ports RJ11 (POTs)
8D5555
Ethernet
4
VoiceGATE SIP Ethernet 1 WAN, 3 LAN, 4 analog ports RJ11 (POTs)
8D5559
Ethernet
4
VoiceGATE SIP Ethernet 1 WAN, 3 LAN, 2 BRI ISDN RJ45 (Bus SO)
8D5556
ADSL
2
VoiceGATE SIP ADSL 4 LAN, 2 analog ports RJ11 (POTs)
8D5557
ADSL
4
VoiceGATE SIP ADSL 4 LAN, 4 analog ports RJ11 (POTs)
8D5558
ADSL
4
VoiceGATE SIP ADSL 4 LAN, 2 BRI ISDN RJ45 (Bus SO)
(1) Max. number of simultaneous phone calls
Router
VoIP SIP
SIP
Server
LAN
ADSL
Internet
Firewall
VoiceGATE
SIP
PSTN
ISDN
GSM
Bridge Ethernet
10/100 Ethernet WAN port
10/100 3 ports switch
DHCP Server protocol supported
Interfaces
FXS ports plug RJ11 for direct connection
to phones or PABXs (local calls side)
FXS BRI ports plug RJ45 for direct
connection to phones or PABXs (Trunk)
1 USB port for the connection of
computers without Ethernet card
1 consolle port RJ45 (optional)
Reset Factory defaut button
10/100 switch (3 or 4 ports)
WEB, CLI and DHCP configuration
Remote firmware update
12VDC power
Operating temperature: from 0 to 40
°
C
Non condensing humidity: from 20 to 95%
CE Mark
