Digicom Tiziano 56 Memory, User Manual

Page: 19 / 33

TIZIANO 56 MEMORY
Modem AT Command Set
3.7
l
%E2 Fallback/fallforward enabled. Enabled only in error corrector or
buffer mode.
AT%L DISPLAY RECEIVE LEVEL IN DBM
Returns a value which indicates the received signal level.
Example
009 = -9 dBm, 043 = -43 dBm.
AT%Q LINE SIGNAL QUALITY
From 000 (good quality) to 127 (poor quality, troubled signal).
AT&C CARRIER DETECT OPTION
&C0 Carrier detect always ON. When modem disconnect DCD (C109)
goes OFF for 1 sec.; function 109 wink.
l
&C1 Carrier detect is ON when remote carrier is present.
AT&D DATA TERMINAL READY OPTION
&D0 DTR signal is ignored.
&D1 Modem return to Command Mode upon detecting ON to OFF
transition on DTR.
l
&D2 Modem hangs up and disables auto-answer upon detecting ON
to OFF transition on DTR.
&D3 Modem reset upon detecting ON to OFF transition on DTR.
AT&F FACTORY CONFIGURATION
&F0 Load factory configuration 0.
&F1 Load factory configuration 1.AT&G GUARD TONE
AT&K DATA FLOW CONTROL
&K0 Flow control disable.
l
&K3 Hardware flow control (RTS/CTS) enabled (Default for data modem
modes).
&K4 Software flow control (Xon/Xoff) enabled.
&K5 Software flow control (Xon/Xoff) in trasparent mode enabled.
&K6 Hardware and software flow control enabled (default for fax modem
modes).
AT&P MAKE/BREAK RATIO
l
&P0 39%-61% make/break ratio with 10 pulses per second.
&P1 33%-67% make/break ratio with 10 pulses per second.