TECHNICAL SPECIFICATIONS
l
Type II PC Card Standard
l
RJ45 port
l
Category 3,4,5 cabling for 10BaseT
l
Category 5 for 100BaseTX
l
IEEE 802.3 for 10BaseT, IEEE802.3u for 100BaseTX
l
10/100 Mbps auto-sensing
l
Full Duplex
l
Activity, Link, 10/100 Mbps led indicators
l
5 VDC, 300mA
l
Operating Temperature 0 to 65
°
C - 4 to 158 F
l
Humidity 10% to 95% non condensing
l
CE Mark
l
Driver support for Microsoft Windows® 3.x, Windows® 98/95/NT,
Microsoft Lan Manager, IBM LAN Support, DEC Pathworks, SUN PC-
NFS, Banyan VINES, Artisoft LANtastic, FTP PC/TCP, Novell NetWare
3.x, 4.x, Personal Netware, OS/2 Warp
HARDWARE INSTALLATION
Insert the card in an unused Type II or Type III PCMCIA slot.
Refer to the UP INSERT sign on the card sticker for correct insertion.
Once fully inserted a card release mechanism should come out (depending
on the PC type).
Connect the PC Card to a 10Base-T
or 100Base-TX hub or switch using
RJ45-RJ45 UTP cables (Category 3,
4 or 5 for 10BASE-T; Category 5 for
100BASE-TX).
The maximum allowable length of
10BASE-T or 100BASE-TX cable
connections is 100 meters (328 ft.).
INSTALLAZIONE SOFTWARE
Windows® 98/95
At card hot insertion or PC
startup the card will be
automatically detected and
you will be asked for the
drivers. Click on Next.
Insert the driver disk into
the floppy drive, type A:\
and click on Browse.
Select Win95 or Win98
folder. Click on OK.
Follow the instructions to
complete the installation.
OTHER OPERATING SYSTEMS OR APPLICATIONS
All drivers regarding supported operating systems and applications are
located in dedicated folders on the diskette.
Refer to the Release.txt file on the diskette for more details and general
informations.
Where needed a *.TXT file provides specific installation and use details.
LED DESCRIPTION
10/100
ON when the card is operating at 100Mbit/s.
OFF when the card is operating at 10Mbit/s.
Link Integrity
ON when the card is correctly connected.
Flashing during data packet receiving.
Activity
ON when the card is correctly initialized.
Flashing during data packet transmission.
Pin assignment
1
RD+
2
RD -
3
TD+
4
not used
5
not used
6
TD -
7
not used
8
not used
