MOBILE & WIRELESS
For further information: [email protected] or http://www.digicom.it
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. All other brands, products and trademarks are property of their respective o
wners.
Modem GSM
Digicom Modem GSM is compliant with most
applications actually used with the traditional analog
modems. The modem is managed through the AT
commands and the ETSI 07.07 and 07.05 standard; it
allows Transparent or Non Transparent (with RLP
Radio Link Protocol) data transmission.
V.110 protocol is supported for a direct connection to
ISDN devices and for an immediate connection.
Also the SMS protocol and the services included into
this protocl are supported.
Modem GSM has a 9 pin serial interface, while the
power supply cabling uses the typical connectors of
automotive solutions to guarantee the maximum
reliability.
The SIM slot and the SIM Holder have been projected
to be easily installed and maintained. The SIM can be
removed by simply acting with a point or a pen.
Thanks to the Flash technology, Modem GSM is local
and remote upgradable.It is possible to transfer the
updating of the new code. Then the microprocessor
on board will automatically reload the Flash and no
operator is needed.
Furthermore, Modem GSM can be remote
configurated in order to carry out any modifications or
test needed.
The maximum security is guaranteed by a
sophisticated system of access control, based on the
Caller Identification (CLI) that will give access only to
authorized users.
Modem GSM is inserted into a plastic case with holes
for the wall mounting.
