1.
Installed on the desktop
Place the machine on a clean bench, this installation is relatively simple,
you can observe the following operation:
●
Ensure the smooth workbench.
●
Around the device enough space for heat dissipation.
●
Do not place objects on the device.
2.
Mounted on the wall
●
The ONU equipment chasis has two cruciform recess, install two
screws in the wall in accordance to the position of the groove.
●
The original selected two mounting screws gently snap into recesses
aligned.
●
Slowly let go, so that the device under the support of the screw
hanging on the wall.
2:2 Panel Lights
LED
Mark
Status
Description
Power
Power
On
The device is powered up
Off
The device is powered down
Optical
signal loss
LOS
Blink
Device does not receive optical signals
Off
Device has received optical signal
Registration
REG
On
The device is registered to the PON system
Off
Device is not registered to the PON system
Blink
Device registration is incorrect
Fast Blink Port is sending or/and receiving data
Interface
LINK/
ACT
On
Port is connected properly (LINK)
Off
Port connection exception or not connected
Blink
Port is sending or/and receiving data (ACT)
WiFi
WiFi
On
WiFi running
Off
WiFi not Working
