AT commands
I/O settings commands
Digi XBee® 3 802.15.4 RF Module User Guide
160
Parameter
Description
1
DTR/Sleep_Request (used with pin sleep and cyclic sleep with pin wake)
2
N/A
3
Digital input
4
Digital output, low
5
Digital output, high
Default
1
D9 (DIO9/ON_SLEEP Configuration)
Sets or displays the DIO9/ON_SLEEP configuration (Micro pin 25/SMT pin 26/TH pin 13).
Parameter range
0, 1, 3 - 5
Parameter
Description
0
Disabled
1
ON/SLEEP indicator
2
N/A
3
Digital input
4
Digital output, low
5
Digital output, high
Default
1
P0 (DIO10/RSSI/PWM0 Configuration)
Sets or displays the DIO10/RSSI/PWM0 configuration (Micro pin 7/SMT pin 7/TH pin 6).
When configured as RSSI PWM output, the device outputs a PWM signal with a duty cycle equivalent to
the dBm of the received packet.
Use
to configure the timeout.
When configured as PWM output (
2
): you can use
M0
to explicitly control the PWM0 output. When used
with
, PWM0 corresponds with ADC0.
Parameter range
0 - 5
