Digi TX54, User Manual

Page: 1073 / 1087

Command line interface Command line reference
TX54 User Guide 1073
Syntax
show event [ table <status|error|info>] [ number INTEGER]
Parameters
table: Type of event log to be displayed (status, error, info).
number: Number of lines to retrieve from log. (Minimum: 1, Default: 20)
show hotspot
Show hotspot statistics.
Syntax
show hotspot [ name STRING] [ ip STRING]
Parameters
name: The configured instance name of the hotspot.
ip: IP address of a specific client, to limit the status display to only this client.
show ipsec
Show IPsec status & statistics.
Syntax
show ipsec [ tunnel STRING] [ all ] [ verbose ]
Parameters
tunnel: Display more details and config data for a specific IPsec tunnel.
all: Display all tunnels including disabled tunnels.
verbose: Display status of one or all tunnels in plain text.
show l2tp lac
Show L2TP access concentrator status & statistics.
Syntax
show l2tp lac [ name STRING]
Parameters
name: Display more details for a specific L2TP access concentrator.
show l2tp lns
Show L2TP network server status & statistics.
Syntax
show l2tp lns [ name STRING]