Digi TransPort WR11 User Manual Download Page 198

Page: 198 / 866

Configure network interfaces

Configure mobile (cellular) interfaces

Digi TransPort WR Routers User Guide

198

PRL update

The Preferred Roaming List is a list of bands and channels in order of preference which the CDMA

module uses when it attempts to locate and connect to a cell system. If the router is having

problems with CDMA reception, it would be beneficial to update the PRL information.

MSL

The master subsidy lock (MSL) code. Get this code this from the mobile operator.

PRL filename:

The name of preferred roaming list file. Get this file name from the mobile operator.

Note

Except for older Sierra Wireless modules, PRL update on both the Verizon and Sprint

networks is carried out over the air (OTA). Manual PRL update using a PRL file is not

available. To initiate automatic over the air PRL update, click the Start button. Please note

that PRL update is normally carried out as part of automatic provisioning on both Sprint

and Verizon.

PRL update CLI commands

Entity

Instance

Parameter

Values

Equivalent web parameter

provision

string1

Free text field

MSL

provision

string20

Free text field

PRL Filename

Summary of Contents for TransPort WR11


































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TransPort WR11

Reviews:

Related manuals for TransPort WR11

Brands by name

Popular brands

Digi TransPort WR11, User Manual

Search results

Summary of Contents for TransPort WR11

Reviews:

Related manuals for TransPort WR11

Brands by name

Popular brands