Command descriptions
TransPort LR User Guide
207
sntp
Configures system date and time using Simple Network Time Protocol (SNTP). SNTP continually polls
an external NTP time server on either a private company network or the internet at a configured
interval rate.
Syntax
sntp <parameter> <value>
Parameters
state
Enables or disables SNTP to set the system date and time.
Accepted values can be one of off or on. The default value is off.
server
The SNTP server to use for setting system date and time.
Value should be a fully qualified domain name. The default value is time.devicecloud.com.
update-interval
The interval, in minutes, at which the device checks the SNTP server for date and time.
Accepted value is any integer from 1 to 10080. The default value is 60.
