Digi PortServer CM User Manual Download Page 45

Page: 45 / 126

Menus and Keyword Monitoring Filters

3-7

To make the change permanent, choose Load/Save Configuration from the Administration section of the
navigation bar, then choose Save to Flash.

Constructing Menus

There are three major categories of tags in the PortServer CM menu hierarchy:
•

Menu tags, which define characteristics of an entire menu

•

Menu page tags, which define characteristics of a single menu or submenu page

•

Menu item tags, which define individual menu items

Menu Definition Tags

Use these tags for defining menus on a PortServer CM terminal server.

Menu Tags

Description

<menu>

indicates a complete menu (all of the following tag pairs are
contained within the <menu></menu> pair)

indicates a menu definition - the <define></define> tag pair contains
the entire menu definition, and is in turn wrapped by the <menu></
menu> pair

<name>

menu name

<menu>

indicates a complete menu (all of the following tag pairs are
contained within the <menu></menu> pair)

area for the administrator to insert comments (not visible to user)

Summary of Contents for PortServer CM































































































































Search results

Summary of Contents for PortServer CM

Reviews:

Digi PortServer CM, User Manual, Page: 45 / 126

Search results

Summary of Contents for PortServer CM

Reviews: