Chapter 2
MIL-3200X Series of FastPort Print Servers
2-3
I
N
S
T
A
L
L
A
T
I
O
N
Table 2-1:
Operating Mode
Figure 2-1. MIL-3200X Front Panel
Table 2-2: Flash and Test Page Select
D3
D4
Mode
Description
Up
Up
Normal
Does not allow a Telnet session. Users can print to the
unit. The
SYS
(system) LED and
NET
(network) LED blink.
Down
Up
Telnet Diagnostic
Monitor
Allows a Telnet session to monitor FastPort or change its
parameters. Users can print to the unit. The
SYS
LED and
NET
LED blink.
Down
Down
Serial Diagnostic
Monitor
A terminal can be attached to serial port 2 to run a serial
monitor. Print jobs are not accepted. The
NET
LED blink.
Up
Down
Test Page
A test page prints on a power cycle. No print jobs are
accepted.
Switch
Position
Mode
Description
D1
Up
Flash
Bank
Selects bank 0 (upper) to run the 4 Mb Flash EPROMs for
uploading the new firmware image.
Down
Selects bank 1 (lower) to run the 4 Mb Flash EPROMs for
uploading. If the upgrade process fails, use this setting and
power cycle the unit to return FastPort to its default settings.
D2
Up
Test Page
MIL-3200X selects parallel port 2 and serial port 2 for test page
printing.
Down
MIL-3200X selects parallel port 1 and serial port 1 for test page
printing.
Table 2-3: Default Settings
D1
D2
D3
D4
Up
Down
Down
Up
FASTPORT
4 PORT NETWORK PRINT SERVER
MODEL MIL•3200X
1 2 3 4
1
2
SERIAL
SERIAL
PARALLEL
PARALLEL
S1
S2
P1
P2
TM
