www.digisportinternational.com
INSTRUCTION MANUAL
STOPWATCH DT1
FEATURES:
- Stopwatch with 1/100 sec resolution in the first
30 min and up to 24h in H:M:S with lap time
display
- Calendar mode
- Hourly chime and alarm
- User selectable 12h or 24h system
- Drop-resistant
CLOCK MODE:
Mode 1
: time
Mode 2
: chronograph
Mode 3
: Alarm
1.
Depress 3 times on
B
to go to the
CLOCK Mode
(fig2), you’re in mode
2.
Depress on A to put back the seconds
to zero.
3.
Depress on C to select the minutes:
depress on A to adjust it.
4.
Repeat the operation to adjust hours:
pressing A, you could choose the 12 or 24 hours
display (A/P).
5.
Depress on C to adjust the date, the
month and the day: each day is symbolized by a
cursor situated under the day initials (
S
; M ; T ;
W ; T ; F ; S)
6.
Depress B to go to the Time/Calendar
Setting mode.
7.
Depress C to go to the alarm mode
8.
Depress A to go to the month/date
display
ALARME MODE
1.
Depress 2 times on B, hours begin
flashing, you are in mode 3.
2.
Depress A to set the digits and C to
select the digits. It is possible to choose
the 12 or the 24h display.
3.
When all have been set, depress B
to return to the normal time mode.
4.
The ALARM is armed automatically
if the contents have been set.
5.
When the normal time match with
the ALARM time, the stopwatch will
sound for 60 seconds. You can press C
to stop the alarm or press A for a 5
minutes snooze.
6.
Press C and A in a row will
sequentially turn the alarm on and off.
CHRONOGRAPH MODE:
1.
From
the
normal time mode,
depress B to go to the CHRONO mode.
Depress A to start and stop the
chronograph.
2.
When the chronograph is running
depressing C will show the SPLIT time.
Press C again to come back on the
chronograph.
3.
When the chronograph is stopped
depressing C will reset the chronograph
to zero. The chronograph displays
MIN/SEC/1/100SEC until 39min59.99sec,
after which the display will change to
HOUR/MIN/SEC. The chronograph has a
full range of 23 hours 59 min.59 sec.
CARE OF YOUR STOPWATCH:
SHOCK
- Be careful to not drop your stopwatch or hit it
against hard surfaces as it may cause a
mechanical damage.
TEMPERATURE
- Do not leave your stopwatch under direct
sunlight or in very high temperatures for a long
time, otherwise the display may become black.
Do not leave your stopwatch in very low
temperature as this may cause a slight time
loss or gain and the change of digits become
slow. In both cases the above conditions will
be corrected when the stopwatch will get to
normal temperature.
WATER-RESISTANCE
- The stopwatch is designed to withstand
accidental contact of water such as splashes
or raindrops, but is not for use under water.
STATIC ELECTRICITY
- The integrated circuit in your stopwatch can
be affected by static electricity. IF the static is
very strong, a permanent damage can be
incurred. Be careful of the TV screen and
clothes made of dry synthetic material, in such
cases a very strong static electricity can be
generated.
MAGNETISM
- Not affected
CHEMICALS
- Do not expose your stopwatch to
solvents such as gasoline and alcohol,
spray of cosmetics, cleaners, paints etc
as they may cause damage to the
stopwatch.
BATTERY CHANGE
- When the display becomes dim of
faded
out,
battery
replacement
is
necessary.
1. Unscrew and remove back cover.
2. Replace with 1 pc fresh V13GA
1.5V
(Dia.
11.6x5.4mm)
or
equivalent.
3. Don't use any metal tweezer to
handle the battery or it may cause a
shortcut.
4. Rescrew the back cover, making
sure that the gasket is in the correct
position.
THE WARRANTY DOES NOT
COVER THE BATTERY.
Week day
HOUR
