Digi DT 500P Operating Instructions Download Page 2

- NEVER pull paper from the reverse direction, this may damage the printer. For replacing the roll of 
  paper before it is used up, first tear off the paper and press the PAPER ADVANCING SWITCH until
  all the remaining paper is out.
- Do not touch the paper on the right side as it may cause poor printing.
- Always store the paper rolls in a cool, dry place and keep away from direct sunlight.

CONNECTION TO PRINTER

1. Insert both plugs of the connecting cord to the printer and stopwatch with the power of the printer
    turned off. Always hold the plug as illustrated . Either plug can be inserted into either jack. Be sure 
   that both jacks are inserted all the way in the stopwatch and printer.
2. After use, turn off the power of the printer, then remove the plugs. After removing the plug from the 
   stopwatch, remember to insert the rubber cap to the jack to keep it away from dust and moisture.

OPERATION IMMEDIATE PRINT-OUT

1. After connecting the stopwatch to the printer, slide the power switch to ON; the paper will advance
    by 1 line.
2. Slide the PRINT MODE SWITCH to the TOP position. Only the SPLIT or SPEED (depending on 
    whether the stopwatch is in CHRONO or SPEED mode) will be printed. If this switch is slid to the 
    DOWN position, both LAP and SPLIT or LAP and SPEED will be printed. ( In SPEED mode, if B is
    pressed while the previous record is still being printed, that SPEED record cannot be printed in 
    real time. The memories still record the full data for recall or upload.)
3. Press button A of the stopwatch to start the race. The YEAR, MONTH and DATE, START together
    with the CHRONO mode will be printed. The time unit in the SPEED distance setting is minutes (H
    for hour and S for seconds).
4. Press A button to stop.

UPLOAD PRINT-OUT

Apart from doing the print-out while the stopwatch is taking the LAP times, the print-out can be done 
by uploading from the memories after the race. This can be done by pressing C button until UPLOAD 
ALL is displayed, connect the printer and turn on the power, then press A to start upload. In this print 
mode the respective LAP/SPLIT or LAP/SPEED times together with their AVERAGE and FASTEST
times are printed. To print out only a particular race, press B when UPLOAD ALL is displayed to go to 
that particular race and press A to print-out.

2

Reviews: