Digi DI-162, Operation Manual, Page: 33 / 35

2
9
PC send “w” in
Standard command
mode
0 - Allow
1 - Inhibit
（
V1.09
）
PC send “t” in
Standard command
mode
0 - Allow
1 - Inhibit
（
V1.09
）
RS232C High speed
output when baud
rates >=9600
(V1.13)
0 – high speed
1 – low speed
Weight unit after net
weight and tare weight
in the text of RS-232C
0 - Allow
1 - Inhibit
（
V1.11
）
10 Scale No.
Low 4 digit
(0000~1111)
（
V1.03
）
11 Scale No.
High 4 digit
(0000~1111)
（
V1.03
）
12
Output RS232 data
condition
(V1.13)
0 – Set Point ok
1 - Always
External printer print format for LP2844 or GP460Pro
000 - Default Format
001 - Customer Format 1 101 - Customer Format 5
010 - Customer Format 2 110 - Customer Format 6
011 - Customer Format 3 111 - Customer Format 7
100 - Customer Format 4
（
V1.12
）
13
Set Point buzzer type
(V1.13)
0 – beep between SP
1 – beep outside SP
Total weight printing
when weight is zero
(V1.13)
0 - Inhibit
1 - Allow
Sending default format
to the LP2844 or
GP460Pro
(V1.13)
0 - Inhibit
1 - Allow
Output data when
SPEC 2 bit 1 is enable
or using printer
(V1.13)
0 - Net weight > 0
1 - Always
For Weight & Measure - (1 4 2)
NOTE: It can only work when the SPAN Switch is on (Enable)
SPEC NO. BIT 3 BIT 2 BIT 1 BIT 0
20
Version display when
power on
0 - Allow
1 – Inhibit
Type of Decimal
point
0 - .(Standard)
1 - ,(Europe)
Start range
00 - ±10% F.S.
01 - ±20% F.S.
10 - ±50% F.S.
11 - ±100% F.S.
（
V1.02
）
21
Negative weight display
mask
0 - Minus gross > 9e
1 - Minus gross
Weight
Re-call Last zero data
0 - Allow
1 – Inhibit
GAIN
00 – 16 /* 3mV/V */
01 – 32 /* 2mV/V */
10 – 64 /* 1mV/V */
11 – 128 /* 0.4mV/V */
22
Weight stability condition
00 - Loose
01 - Normal
10 - Tight
11 – Stringent
G Calibration
0 - Allow
1 – Inhibit
IR mode protected by
SPAN SW
0 - NO
1 – YES
23
Manual tare
cancellation
0 - Allow
1 – Inhibit
Tare subtraction
0 - Allow
1 – Inhibit
Tare accumulation
0 - Allow
1 – Inhibit
Auto tare clear when
rezero
0 - Allow
1 – Inhibit
All manuals and user guides at all-guides.com