Digi CR4110 Installation Manual Download Page 2

CR4110 Installation Guide 

Disclaimer 

Digi International makes no  representations or  warranties with respect to the  contents or 
use of this manual, any software drivers or associated application software provided with 
this  product  and  specifically  disclaims  any  expressed  or  implied  warranties  of 
merchantability or fitness for any particular purpose. 

Digi  International  reserves  the  right  to  modify  or  revise  all  or  part  of  this  document,  its 
contents,  and  any  products  described  herein  at  any  time  without  prior  notification  and 
shall  not  be  responsible  for  any  loss,  cost  or  damage,  including  consequential  damage, 
caused by reliance on these materials. 

Product disposal instructions 

 

The WEEE  (Waste  Electrical  and  Electronic  Equipment:  2002/96/EC)  directive  has  been 
introduced  to  ensure  that  electrical/electronic  products  are  recycled  using  the  best 
available recovery techniques to minimise the impact on the environment. 

This  product  contains  high  quality  materials  and  components  which  can  be  recycled.  At 
the  end  of  its  life  this  product  MUST  NOT  be  mixed  with  other  commercial  waste  for 
disposal. Check with the terms and conditions of your supplier for disposal information. 

Digi International Ltd WEEE Registration number: WEE/HF1515VU 

Copyright 

©  2008  Digi  International.  All  rights  reserved.  No  part  of  this  document  covered  by 
copyright may be reproduced or copied in any form or by any means graphic, electronic, 
or  mechanical,  including  photocopying,  recording,  taping,  or  information  and  retrieval 
systems without written permission of Digi International. 

Issue 1.2, October 2009. Part # 6211-0024 REV A 

Summary of Contents for CR4110














Reviews: