Digi-Tron ULPH Operation Manual Download Page 6

3.7

 

  RS 232 Serial Port 

The scale has a RS232 serial communication port.  It is used to connect the scale to a 
computer or serial printer to print labels. 
 

3.7.1

 

Communication with a computer- Terminal Mode 

This option allows the scale to be connected to a PC so that with the use of management software it 
is possible to control the weighing and print reports and labels.  The scale’s communication port has 
a configurable speed from 300 bps (bits per second) to 19200 bps.  The instrument leaves the 
factory set at 9600 bps.  A serial cable is required to connect the scale, the weight information is 
sent continuously. 
The scale continuously transmits a fixed stream of 8 bytes.  The data are 8 bits in size. 

 

The stream for Modo Contadora (Counting Mode) is in the format in Figure 1. 
0 primeiro byte - 0 first byte 
Contadora - counter 
Sobrecarga - excess weight 
Quantidade negativa - negative quantity 
Equilíbrio - equilibrium 
Centro de zero - zero center 
Modo tara - tare mode 
Quantidade (byte + significativo) - quantity (byte + significative) 
Quantidade (byte + signifacativo) - quantity (byte + significative) 
Retorno de carro - carriage return 
Status- status 
Fim de frame- end of frame 
 
Figure 1- Stream for Weighing Mode 

 
 

 

 
The weight or the quantity is coded in ASC II with decimal point. The carriage return 
character is 0x0D (hexadecimal). 
The sending of the stream is interrupted in the case that there is no significance.  The excess 
weight bit is set when there is excess weight (superior trace) or underweight (inferior traces) 
or analogical digital converter exceed (Error 5). 
 
Note: For more details about configuring the serial port, check the general configurations 
item. 

 

3.7.2

 

Printing Labels 

The scale offers several label printing options.  The serial port just needs to be 
configured for such (see general configurations item).  There are three printer models 
compatible with the scales. 

-

 

Epson LX300 / LX300+ Dot Matrix Printer – Adhesive Label Printing 

-

 

Bematech MP20MI Dot Matrix Printer – Ticket Printing 

-     Argox OS 214 Thermal Printer – Bar Code Label Printing 

 

 
For example, a stream transmitted in WEIGHING 
MODE is visualized in Hyper Terminal as E1234.5. 

Summary of Contents for ULPH











Reviews: