- 4 -
Setup
Open the battery compartment on the back side of the clock and insert
two 1.5V AAA batteries in the correct polarity.
Remove the protective film from the display.
The clock will now automatically begin the radio signal reception
process and the reception symbol will blink on the display. After 3-5
minutes the correct time and date will appear.
During the reception process, all buttons except DOWN are
deactivated. The reception process can be stopped by pressing DOWN
and restarted by pressing and holding DOWN.
If the reception of the time signal was not successful, please restart the
reception attempt at a different location or set the time manually.
12/24 hour time display
Press UP to select 12 or 24 hour time display mode. If 12 hour mode is
selected, the AM(before noon) or PM(afternoon) symbol will appear on
the display.
Temperature display in Celsius or Fahrenheit
Press DOWN, to select the temperature unit Celsius (°C) or Fahrenheit
(°F).
Manual time setting, time zone selection and day of
the week language selection
Press and hold MODE for 3 seconds.
The time zone adjustment will blink on the display. Set the difference to
your home time zone by pressing UP or DOWN and confirm your
setting by pressing MODE.
Set the hours, minutes, year, month, day, day of the week language
(GER=German, ENG=English, DAN=Danish, ESP=Spanish,
NET=Dutch, ITA=Italian, FRA=French) in the same way.
