1981-83 MALIBU
LED PANEL INSTALLATION
3
4. Attach mounting brackets.
Both housings will require mounting brackets for the LED panels to attach to.
2. Attach an angle bracket with its
face on the mark on the mark.
1. Start with the smallest pocket
Measure down 5/8” from the vertical edge.
3. Repeat the procedure for the opposite
wall in the pocket. The LED panel now
has 2 ledges to sit on.
Lip edge
5/8” down
4. For the other 3 pockets, mount the brackets
on the horizontal ends. Again, measure down
5/8” from the edge and attach the brackets.
5. Plug in extension wires, grommets.
Feed the extension wires through the socket hole. Wrap the rubber
grommet around the wires and press it into the socket hole. Once the
LED panels are in place for good, you will still be able to easily plug
and unplug the harness and remove the buckets.
It is best to use a small flat head screw driver to work the grommets onto the socket holes.
Hint
