2
Compass Mode
User needs to place the watch horizontally to obtain precise compass reading.
The compass function provides the user with:
A cardinal abbreviation for the direction
- Bearing in degrees
- A North-South arrow
- Resolution: 1°
- Accuracy: ± 5°at North-South (0°) direction.
Field 1: cardinal point of the 12 O’clock direction of the watch.
Field 2: the bearing in degrees of the 12 O’clock direction of the watch.
Field 3: current time
The Outer Circumference graphically displays the North-South arrow, for which the one-lit segment
shows the north and the three-lit segment shows the south.
The compass enters “sleep” mode and an “ --° ” indicator appears in Field 2. Press [S4] to reactivate
the compass measurement.
Calibrating the compass
A compass calibration should be done when it is subject to close proximity of magnetic sources,
extreme cold weather, after battery replacement or suspected severe environmental changes.
If the compass is not showing the direction correctly, Place the watch horizontally on a flat surface.
Hold [S3] for 1 sec to enter the compass calibration mode. A dot at the circumference starts moving
clockwise immediately. Turn the watch slowly anti-clockwise in such a way that the moving dot at
the circumference is always roughly pointing to the same direction. Continue this for 2 full circles
until the calibration process is complete with the display returned to compass display.
During Calibration the display is as follows:
Field 1: “ CAL ”
Field 2: calibration indicator “ ”
Field 3: current time
Temperature Mode
Temperature range: –10 °C to 40 °C.
Temperature resolution: ±1°C.
Field 1: day of week
Field 2: current temperature
Field 3: current time
PRESS [S2] to toggle between ºF or ºC
Stopwatch Mode
Range: 23 hours 59 minutes and 59 seconds.
Field 1: seconds and tenths of a second
Field 2: hours and minutes
Field 3: current tim
COMP
TIME
TEMP CHR TIMER
COMP
TIME
TEMP CHR TIMER
COMP
TIME
TEMP CHR TIMER
